Text Box: 6 X 6 1.) This class is made up of a stock Sassy Chassis and stock Tamiya Clod Buster parts. These components shall not be modified.                  a) Three Kyosho Mega, Lemans 360, Magnetic Mayhem, or any                       “Roar” stamped motor s                       (1) No modifications allowed, except a), (2) and (3)                                   (2) The brushes and springs may be changed with only types                                       intended for R/C motors                                   (3) The brush hoods that came with that motor may be                                         removed and reinstalled for commutator maintenance only                                         (example, cleaning, polishing, turning)                                   (4) Fixed end bell motors may not be opened.                  b) Pinion gear may be changed                                   (1) No other gear changes are permitted                                   (2) No additional gears or gearboxes are permitted                                   (3) No modifications of gear cases are permitted                                   (4) Adjustable motor mounts are permitted                                   (5) Two piece rear axles are permitted                  c) Bearings are allowed (Vehicle Only)                  d) Suspension may be altered                                   (1) The wheel base is made up of the stock Clod Buster                                         Suspension and the stock Sassy Chassis                                   (2) The transmission support bracket B11 may be replaced                                   (3) Two transmissions are to be used in the rear locations                                   (4) The two rear transmissions must be used in the same                                         direction as the rear transmission in a stock Clod Buster                  e) Any scale appearing body is allowed                  f) Counter weights and weight racks may be added                                   (1) Weights that are seen must appear to be real and within                                         scale                  g) Hitch may be added                  h) No other modifications will be permitted                                   (1) With the exception of rule number #6a, 6b, and 7b   2.) Weight                  a) Maximum gross vehicle weight is twenty pounds (20 lbs.)  

 

Radio Controlled Pullers of Central New York

Text Box:   3.) Hitch                  a) Maximum hitch height is four inches (4")                  b) The hitch must be mounted to the vehicle in such a way as to not                       permit any movement                  c) Adjustable hitches are allowed, but must be locked when pulling            d) The hitch must incorporate a minimum of a 5/16" inch hole,  and be                 located no more than 1/2" inch from the rear edge of the hitch so the                 sled hook will reach the hole                  e) Extra unusable hitch holes must be sealed                  f) Vertical holes requiring the sled hook to be hooked horizontally are                       not allowed   4.) Battery (s)                  a) Fourteen (14) 3000 mah max  nickel cadmium or nickel hydride                       batteries labeled at 1.2  volts each are permitted,                  b) Non-stock battery locations are permitted                  c) Batteries must be concealed                  d) Hand-built battery packs are permitted   5.) Length/Width - must include all parts, weight rack, body, hitch, etc. of pulling       vehicle                  a) Maximum vehicle length is thirdy inches (30")                  b) Maximum vehicle width is sixteen inches (16")   6.) Tires                  a) Maximum tire diameter is six and one half inches (6-1/2").                      Jig must pass easily over tire without force.                  b) Maximum tire width is four and one half inches (4-1/2").                       Jig must pass easily over tire without force.                  c) Tires may be changed                   d) Rims may be changed                  e) Tires may be cut                  f) Dual wheels are not permitted                  g) Tire chains, added spikes, pins, etc. are not permitted   7.) Differential                  a) Differential must be original for that vehicle                  b) Differential may be locked                  c) No "after market differentials" will be permitted   8.) Tech                  a) The decisions of the Tech Official (s), regarding rule compliance, and                       general rule # 4 and # 18, are final and can not be overruled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ Up ] [ Digger ] [ Garden Tractor ] [ Box Stock 2WD ] [ 2WD Truck ] [ Pro Stock Tractor ] [ 4WD Modified Truck ] [ 2WD Sportsman ] [ Dual Motor Super Stock 4WD ] [ 2WD Nitro ] [ 6x6 ] [ Insane ]